Hardware hacker BigCrimp opensourced a new portable floppy3.5 that enables access to old-school floppies in the modern world of networks. It is a big deal as it enables to easily go and access old-school floppy contents wirelessly and digitize them without having to physically plug them into a computer drive. It is a great resource for hobbyist and archivists to easily store their data from rotting media in a convenient way. The convenience comes from being able to access the media wirelessly in addition to directly connecting it via USB.
Open-source device reads 3.5-inch floppies via Wi-Fi or USB for archivists
floppy3.5 is a NAS (network attached storage) that has been specifically designed for 3.5-inch floppy disks. The floppy3.5 device has been designed by BigCrimp to read and copy the contents of floppy disks over a Wi-Fi network or directly by USB cable. The device is based on a custom-made printed circuit board (PCB) where an RP2354A microcontroller is placed. An ESP32-S3 module has been incorporated to act as a bridge to communicate with the Wi-Fi and network.
Specifications
- Microcontroller: RP2354A
- Wi-Fi Module: ESP32-S3
- Display: Monochrome LCD
- Storage Interface: microSD
- Protocol: Greaseweazle

The system is designed to work with Greaseweazle protocol to directly control the floppy drive for accurate disk images. By default, the floppy3.5 supports FAT12 file system for legacy floppy disks. The disk image can be stored on a microSD card in the given slot of the device. The floppy3.5 has a monochrome LCD screen for displaying status information while in use.
The floppy3.5 has open-sourced design files. Even 3D-printable files for the enclosure have been provided. With floppy3.5, files can be accessed from a connected device using a web interface.
This makes it very easy to share stored floppy files on a local network wirelessly. In essence, it's a hardware solution to storing old-school media using open-source protocols.



Comments (0)