Melted PCIe connectors reported on Radeon RX 9060 XT and GeForce RTX 5060 Ti despite proper wattage

Melted 8- pin PCIe connectors reported on AMD Radeon RX 9060 XT and NVIDIA RTX 5060 Ti. Improper insertion suspected as primary cause.

Melted 8-pin PCIe power connector on a graphics card
Melted 8-pin PCIe power connector on a graphics card

A couple of different instances of melted 8-pin PCIe power connector incidents have just popped up on Reddit. This is something that the desktop PC DIY builder or upgradee needs to be aware of when it comes to new modern graphics cards. This involves melted power connectors that are affecting and budget-class GPUs.

Melted 8-pin PCIe power connector on a graphics card
Melted 8-pin PCIe power connector on a graphics card

Check your 8-pin PCIe connectors for proper insertion to avoid damage

This may not be a problem of one manufacturer, but possibly how people insert connectors. It's something that folks who are using a standard power cable with their purchases should probably be aware of. Check your connector closely to avoid potential damage to your desktop systems.

One incident is an AMD RX 9060 XT and $300 Corsair PSU. This power cable is four years old. Then, another incident is an NVIDIA RTX 5060 Ti with an Ant eSports 750W PSU.

Both the graphics cards are budget GPUs and tend to run in the 160 – 180 watts range. Both cases fall under the safe operation range for standard PSUs.

For both the incidents, the power cable, where it meets the GPU port is melted. Both the connector tip and the GPU port. According to the community analysis, it seems that improper connection inserting is the main issue.

One user mentioned that the connector was not properly inserted into the GPU port. This may very well have been a part of the first case, but the source isn't outright stating that this was the case of the connector improper insertion that caused this in the Ant eSports incident.

The Ant eSports PSU is thought to be an Indian brand that makes peripherals and hardware. Unconfirmed. As we've covered before about software aspects of the Radeon RX 9060 XT, for example, CUDA-for-AMD-Windows Runs CUDA on Radeon RX.

Now these are hardware incidents. Make sure you're connecting your cables properly with your graphics cards power cables!

Confirmed – melted connectors happen with different GPU model of different vendor. Different PSU brand. It seems likely from the evidence that it was the connector insert quality that may have played at least a part in one of these cases.

Check to make sure that you're connectors are fully inserted with 8-pin PCIe connectors. Avoid melted connectors.

Comments (0)

Add a comment

Keep it civil, relevant, and useful to other readers.