Acer comes under fire for poor warranty repair with Predator Helios Neo 16S AI laptop which has bad thermal issues after the warranty repair service. The event highlights the dangers of using an electrically conductive liquid metal thermal compounds in consumer devices. For consumers that use the authorized service stations for repair, this can be a problem if they end up in the hands of advanced cooling compound applications. This is a possible Achilles' heel for maintaining high end gaming gear.
Warranty repair botches liquid metal application, leaving CPU throttling at 105°C
The situation involves the Predator Helios Neo 16S AI, a liquid metal based gaming laptop by Acer. An attempt at repairing the laptop using warranty by a warranty repair guy, and it went really, really bad as the thermal paste and liquid metal was applied wrong by the warranty repair guy. The problems happened during regular service repair, which is a big concern as the training for specialized cooling may not be up to the task. Even after the attempted repair, the laptop is still thermal throttling as the thermal management is now poor for the laptop.
The attempted repair by the warranty guy involved using a knife to apply the thermal paste for the CPU and only putting two drops of liquid metal on GPU (no spreading). Also, the tech forgot to put thermal interface material on the CPU at all before the first application. The temperatures post-repair are 105 C for CPU and 87 C for GPU. This is the thermal throttling state for the laptop when running.
There are significant risks to applying liquid metal the wrong way on a laptop that is of close quarters variety. The electrically conductive ones must be spread correctly or you can end up with short circuits. It doesn't seem like the thermal paste and metal application is sufficient to cool the CPU / GPU as that is the current state of the laptop. Users that have this laptop model must be careful if they end up needing warranty service.
This is the result of a user experience report from a user who had the service done. The user mentions that the liquid metal was all messed up by the tech and the system is throttling. The exact temperatures and the methods of application are quoted from the original poster. Acer has not confirmed these facts as of now.



using a knife to apply thermal compound is absolutely insane
105 C CPU throttling means the cooler is not making contact at all. The knife job left gaps
is acer responsible for the third party repair shop quality or just the product itself
authorized service centers are extensions of the brand. if they botch liquid metal on a premium model they should cover the rework and any damage
i bet the gpu temp is high because the liquid metal was just two drops in the center
why does acer even use electrically conductive liquid metal in consumer laptops with tight clearances
kernel thermal logs will show the throttling curve spiking immediately. the firmware is doing its job protecting the silicon
this is exactly why i stick to standard paste for my daily drivers