Here's an overview of the new safety feature Corsair is implementing with its 12V-2×6 power connectors. Introducing, PinProtect! The new feature is supposed to prevent GPUs from overheating/melting due to loose/broken GPU power cables. Now that buyers with premium GPUs will get to learn how Corsair is going to reduce hardware damages from power delivery issues.
Corsair uses custom 6-switch cable to validate safety on RTX 5080
To imitate real life connector problems, Corsair designed a special test cable. The special 12V-2×6 cable features six separate switches placed on the cable's middle. Corsair can use these switches to individually disconnect power from specific pins. This emulates a bad connection or partial line failure in a normal connector.
PinProtect Test Specifications
- Test Cable Switches: 6 independent switches
- Connector Type: 12V-2×6
- Test GPU: GeForce RTX 5080
- Test PSU 1: RM1200e Gen 2
- Test PSU 2: HX1000i SHIFT CRYSTAL

For testing their safety feature, Corsair used a GeForce RTX 5080 GPU. The PSU models they chose for the tests are RM1200e Gen 2 and HX1000i SHIFT CRYSTAL. As seen in the showcase, PinProtect is constantly checking the power delivery condition of the pins on the connector.
PinProtect will cut power once it detects that only one of the six positive pins is working. For the HX1000i SHIFT CRYSTAL model, Corsair has iCUE software to track the current levels of each pin. It will shut down the GPU power if the overcurrent condition persists for 30 seconds, reaching 9.5A. For the record, Corsair mentioned that their proprietary test cable is not for retail sale.



so the 9.5a threshold is basically just a fancy way to say ‘wait until it burns’
it cuts power when only one pin works which is smart but i wish they tested this on older rtx 3090s instead of just the 5080